AngelEyez Radio DJ Help

 

This is to help you become familiar with how to Dj on

Angeleyez.net radio. Follow these easy step by step instructions.

 

Required Software

download Winamp Here

download Shoutcast Here 

 

Installation Step 1

When installing Winamp make sure to install it into its own directory, Install Winamp.

Then install Shoutcast. It should automatically be installed into the new Winamp directory. Open your Winamp. Set Winamp to stay on top. Now open preferences. You can do this by hitting ctrl-p. In preferences go to plug-ins: DSP/Effect. Highlight "Nullsoft Shoutcast".

Now hit close. This will open the Shoutcast window pop up.

 

Output Configuration Step 2

 

Click the Output tab.

Click on the "connection" button as indicated by the red arrow.
In Address field. enter The Address: 64.202.98.33  and Port: 2160
Password: The password will be given to you by Wolverine or Goldie when you are all set to DJ.

Check Auto Reconnection on Failure, leave at default 30 seconds

Never give out your password.

Not even if you know someone has been a Dj on the network before.

 

 Output Configuration Step 3

 

 

Click on the Output tab

Click the Yellowpages button as indicated by the red arrow.
Check Make server public,  Check / Enable Title Updates,  Check Title Auto:

Do Not Check connect at startup.
Description: Angeleyez Chat Network Radio - "Your Nick Here" . This title will be shown in the listeners winamp along with the song title you are playing.
URL: http://radio.angeleyez.net
IRC: #angeleyez-radio

Genre:  you can put the type of music, if you want ... else leave it blank
AIM: ICQ:  ... optional...

 

Encoder Configuration Step 4

 

Click the Encoder tab

Click on Encoder 1

Encoder Type: mp3 encoder
Encoder settings:  24kbps/22,050khz Mono
it's the lowest setting, and caters to the dailup listeners.

Very Important to stay at this setting and NOT a higher setting.

 

Input Configuration Step 5

 

Click Input tab

Device: Winamp

 

Getting Started Step 6

 

First you need to have the Mp3 files you are going to be using located on your hard drive.

Playing them from Cd/Dvd drive is not suggested.

Make sure nobody else is using the stream. Ok it with an oper if you have any questions.
You need to /join #angeleyez-radio and remain in #angeleyez-radio while Dj'ing
In your winamp, put some songs in the play list.
Play the Mp3,  then hit the "connect" button in the Output tab .

It should now say connected.
If not check the spelling of the server address and password.

 

Getting Started Step 7

 

Using the microphone(Optional)

Click the Input tab
select input device as indicated by the red arrow to Soundcard Input.
That brings up the mic info.
Click and hold "push to talk" as indicated by the black arrow.

 

Getting Started Step 8

 

These are the commands you will need to use in #Angeleyez-radio (NOT in #Angeleyez)

These commands are sent to the Radio Bot MusicBox and are NOT required for DJ'ing,

only for advertising.

MusicBox displays the advertising in #Angeleyez and #angeleyez-radio channels

You nust be set up in MusicBox for it to recognize you. If you change your ident( ident@ip.address.ect ) or ip address or get a vhost, the Bot will no longer recognize you.

 

Advertising 

-add  "the show name" with out the quotes.
  It will put the add into both #Angeleyez-radio and #Angeleyez
  Advertising should be done every 5 minutes or so. Or within reason.

  Be sure NOT to flood  #Angeleyez !
-warn  Displays a warning message that the current song may be inappropriate

  for some listeners.

-pl  Displays an add, telling users to press play again. Helpful for when you get

  disconnected from the radio server
-test  Test command to make sure the MusicBox bot is recognizing you properly.
-djcommands  and MusicBox will message you with the list.

 

When done cancel the stream.
Have Fun.....

Never give out your password. Not even if you know someone has been a Dj on the network before.

Dated July 21, 2007
For use on irc.angeleyez.net